A big job for a small area
The homeowner wanted to enlarge an existing space, that was small, dirty and humid
Excavation
We excavated as much as possible without disturbing the structure of the building and installed reinforced footings .
In the process of building the walls
A tight fit
Before
It was a small area and we were dealing with a lot of humidity
Fuel Tank
For an area like this, it's hard to give all the information in pictures. In the room we enlarged, there were 2 fuel tanks and plywood retaining walls. It was dirty, very humid and confined. A third fuel tank was in the lower section.
Wall Progress
We then constructed the masonry retaining walls and reinforced them with rebar / filled solid, creating the upper room. We back filled the walls with a cement mixture to prevent settlement. After the walls were up we installed our WaterGuard product around the entire perimeter (upper and lower) with a vapor barrier and drainage matting. A SuperSump with UltraSump were installed in the same location as the existing pump (a second pump was abandoned). We then poured the floors. After the slabs were poured for a couple of days we installed the SaniDry Sedona and drained it into the pit.
Wall Result
We then constructed the masonry retaining walls and reinforced them with rebar / filled solid, creating the upper room. We back filled the walls with a cement mixture to prevent settlement. After the walls were up we installed our WaterGuard product around the entire perimeter (upper and lower) with a vapor barrier and drainage matting. A SuperSump with UltraSump were installed in the same location as the existing pump (a second pump was abandoned). We then poured the floors. After the slabs were poured for a couple of days we installed the SaniDry Sedona and drained it into the pit.
Final Result
We then constructed the masonry retaining walls and reinforced them with rebar / filled solid, creating the upper room. We back filled the walls with a cement mixture to prevent settlement. After the walls were up we installed our WaterGuard product around the entire perimeter (upper and lower) with a vapor barrier and drainage matting. A SuperSump with UltraSump were installed in the same location as the existing pump (a second pump was abandoned). We then poured the floors. After the slabs were poured for a couple of days we installed the SaniDry Sedona and drained it into the pit.